1-minute read of a 3 min report

Cisco patches Nexus MPLS flaw that permits root-level code execution

By

1-minute read

What a defender needs to know

Cisco’s October 7 advisory describes CVE-2026-76465, a CVSS 9.8 flaw in MPLS OAM packet processing on vulnerable Nexus 3000 and standalone NX-OS Nexus 9000 switches. With MPLS OAM enabled, a crafted echo-request to an IP address on the switch can execute code as root or crash a process and reload the device. Cisco found it internally; its PSIRT is unaware of public announcements or malicious use.

Run show feature | include mpls_oam on the relevant switches and record the installed NX-OS release, platform, mode and feature state. MPLS OAM is disabled by default; Silicon One Nexus 9000 models cannot enable it, and ACI-mode Nexus 9000 switches are outside the affected set. Identify which networks can send IP traffic to each affected switch, including interfaces beyond management. This is a different feature from NGOAM, which has its own advisory coverage.

For affected releases, use the Cisco Software Checker linked in the advisory to select the first fixed release for that platform and upgrade. If diagnostics are dispensable, evaluate impact and disable the feature with no feature mpls oam; Cisco says this removes the attack vector. A Live Protect shield is a temporary bridge if the feature must remain on. Rerun the feature command after disabling and expect disabled; after an upgrade, match the running release to the checker result. Restricting management access alone leaves other reachable switch IP addresses in scope. Save both verification results with the platform and release for maintenance follow-up.

Primary sources